Hilti HIT-RE 500 V3
Hilti HIT-RE 500 V3

Hilti has made the legendary HIT-RE 500 even better with the introduction of the Hilti Adhesive anchor system, HIT-RE 500 V3. This versatile system provides more than a 60 percent increase in published load performance, the lowest installation temperature in the industry, and has received ICC approval for cracked and uncracked concrete and all seismic zones.

The HIT-RE500 V3 is the first and only epoxy to cure in freezing temperatures with a temperature range of 23°F to 104°F, and it has the shortest cure times for any epoxy. With the HIT-RE 500 V3, contractors will spend less time waiting for curing and greatly increase the versatility in cold weather. The HIT-RE 500 V3 is ideal for applications such as structural connections with post-installed rebar, substituting of misplaced and/or missing rebar and anchoring structural steel connections.

HIT-RE 500 V3 also has the highest published load capacity of any epoxy in the industry. Along with HIT-HY 200, Hilti HIT-RE 500 V3 is the second ICC approved system with Hilti’s innovative SafeSet hollow drill bit.

The SafeSet system with the hollow drill bit and VC20/40 vacuum allows contractors to perform chemical anchoring applications more efficiently and reliably with no required manual hole cleaning. When used with the new TE-YRT roughening tool, HIT-RE 500 V3 can be utilized in both cracked and uncracked concrete diamond-cored holes, and greatly reduces the cleaning typically required for cored-hole installation.

The HIT-RE 500 V3 system comes in 11.1, 16.9 and 47.3 ounce foil packaging which is easy to dispense when using the electric HDE 500 or manual HDM 500 Hilti Dispensers.

Hilti Inc.