MicaMax3 is a basecoat, exterior installation, and finishing system all in one.
Grey Garage Coat has a virtually unlimited pot-life, allowing installers as much time as they wish to finish their flooring projects with no waste.
Use Formula One Guard-W, a water-based finish, with a high-speed burnisher to enhance the gloss of ground and polished concrete surfaces.
-
Selected manufacturers of applicator tools.
Gloss Restorer is designed for protection and cosmetic enhancement of concrete.
TextureS-tone is an eco-friendly, spray-applied decorative coating.
The One Day Floors polyaspartic polyurea coating can withstand 98% relative humidity with a vapor transmission rate of up to 10 lbs.
Rhino FastFloor DF (Decorative Floor) is a two-component, rapid-curing, hybrid polyurea coating system.
HP Spartacote offers several industrial-strength polyaspartic coating systems for residential garage floors.
When Planicrete UA is mixed with Keracolor U or Ultracolor Plus grouts, available in 36 designer colors, the resulting toppings open up a world of opportunities for concrete artisans.
The advantages of UV coatings over traditional methods are significant to both significant to both customers and contractors.
For a high-luster, high-gloss appearance, Wet Look Sealer—High Gloss forms a film coating designed to waterproof, seal, and enhance the color of decorative concrete.
There are differences between coloring systems, but common problems lie with each.
Problems with coatings often rank No. 1 with decorative concrete contractors. They arise when sealed surfaces become white or frosty, scale off, or blush.
Pure-Shine HS Floor Finish gives concrete, terrazzo, quarry tile, and other surfaces a glossy finish that lasts longer and requires fewer coats than other products.
Trojan Masonry Sealer penetrating sealer fills the voids and coats the interior particles of the matrix to waterproof and reduce vapor transmission in concrete and masonry.
This line of chemical stains—available in a range of shades—creates a variegated appearance on concrete substrates.
Decorative concrete work results from creativity and skill, learning the proper techniques, and using products that make a job even better.
Brian Whinnery says that his company concentrates on a wide range of decorative finishes but he also installs industrial flooring.
As one of the older more traditional decorative concrete finishes, salt finish concrete is the most popular in nonfreeze/thaw regions around the country. For little additional cost you can add texture to just about any hardscape.