Advertisement
 

Welcome to the Hanley Wood University Continuing Education Center!

Hanley Wood University is the premier destination for construction professionals seeking continuing education and training programs. Architects, builders, contractors, remodelers, and other professionals required to obtain credits, certifications, or training rely on Hanley Wood University for the courses they need to maintain their professional expertise. All of the courses found on Hanley Wood University are free and can be accessed 24 hours a day, seven days a week, 365 days a year.

 

Follow Hanley Wood University on Facebook!

Give us Hanley Wood University your feedback on your completed courses.

Follow Us on Twitter!

Follow Hanley Wood University on Twitter for information on our latest courses!

 

Courses

Introduction to Carbon Fiber Grid-Reinforcement Enclosure Systems

This program is registered with the AIA for 1 CEH. Carbon fiber grid-reinforced enclosure projects have been completed in more than 25 states from Maine to Washington – with most completed east of the Mississippi. This course will provide learners with knowledge of carbon fiber grid reinforced enclosure projects, and help them to understand their uses in everyday buildings. This course will look at the basics and variety of uses of carbon fiber grid-reinforced enclosure systems in different areas, such as: Technology, Wall Panels, Cladding Panels, and Sustainability. It will highlight the strength and sustainable benefits, as well as key characteristics of the material. Take the course.

Posted:
May, 2012
Subject(s):
Building Envelope
Sponsor:
AltusGroup
 

Ground and Polished Concrete

This course will take a closer look at what ground and polished concrete is, and their benefits, which include low maintenance, improved air quality, durability, and many more. We will also take a look the different types of chemicals that are used to densify concrete as well as looking at the basic methods used for coloring polished concrete. We will identify the different types of grades and classes used to define the depth of the cut and the level of reflectivity. Finally, we will look at some key elements to success with ground and polished concrete. This course is not registered with for credit with AIA. Take the course.

Posted:
May, 2012
Subject(s):
Concrete, Polishing
Sponsor:
Scofield Systems
 

Advances in Concrete Consolidation

This program will explain the importance of vibration speed in producing quality concrete, and will introduce new controlled-speed vibration equipment that can help reduce the incidence of surface defects. This course is not registered for continuing education credits. Take the course.

Posted:
April, 2012
Subject(s):
Concrete, Concrete Construction
Sponsor:
Wyco Tool
 

Strong and Smooth – Using Smooth-Finish Concrete Columns in Building Design

This article appears in the print and digital editions of the January 2012 issue of ARCHITECT magazine and is registered for 1 hour with AIA. The article discusses the history of columns in architecture, from wood to concrete, how concrete columns are formed, a growing movement toward finish-free columns, and concludes with a short case study of a new complex on the University of Texas at Austin campus. Take the course.

Posted:
February, 2012
Subject(s):
Concrete, Formwork
Sponsor:
Sonoco
 

Proper Concrete Formwork

You’ve no doubt felt the pinch of a down economy when you’re asked to come in at a lower bid than a competitor. Everyone in the design and construction industries is being asked to design and build better structures at a lower cost. This is easier to do for some types of projects than for others. Sometimes corners can be cut, and sometimes they can’t. This unit will look specifically at erecting concrete formwork. As you know, formwork determines the final shape of concrete but also, its strength, color and surface characteristics; where formwork is concerned, corners should not be cut. On some jobs you may need to use custom made forms, but there are commercial systems available that make work more efficient and less expensive, helping you to win bids. This program is intended for contractors and is not registered for continuing education credit. Take the course.

Posted:
January, 2012
Subject(s):
Concrete, Formwork
Sponsor:
Doka
 

Cementitious Materials in Concrete: Performance and Sustainability in Construction

: This course is registered for 1 AIA HSW/SD hour and describes where concrete has been used in a variety of projects that support sustainable construction. It outlines the manufacturing process and source of cement and other cementitious materials used in the production of concrete. It also outlines some of the physical properties of these materials, how they may be used in concrete to enhance durability, and how advances in mixture design and manufacturing technology enhance concrete’s contribution to sustainable construction. Take the course.

Posted:
January, 2012
Subject(s):
Cementitious Materials and Pozzolans, Sustainability
Sponsor:
Holcim
 

Pre-Applied Waterproofing Technology

This program is registered with the AIA for 1 CEH. Pre-applied waterproofing is the practice of installing the waterproofing prior to building the structure; typically the pre-applied waterproofing will be directly in contact with the exterior of the foundation slab and walls and is used to protect the foundation and building from water and moisture ingress. The intent of this course is to provide a better understanding of pre-applied waterproofing so that systems can be selected and designed with a higher level of technical expertise. Take the course.

Posted:
December, 2011
Subject(s):
Building Envelope, Foundation, Moisture Barriers
Sponsor:
Grace
 

Anchoring in Concrete: Tools and Techniques for Jobsite Safety

Proper installation of anchor bolts isn't as simple as drilling a hole, and inserting the anchor. Proper installation has become extremely important over the past few years. This program will review tools and techniques for jobsite safety in concrete anchoring projects. This program will start by giving you an overview of terms and definitions from ACI 318 Appendix D, titled Anchoring to Concrete that will define different types of anchors appropriate for different structural requirements of concrete. We’ll move on to discuss proper procedures for installing anchors in concrete, and some tools you can use to get the job done correctly. Finally, we’ll discuss different drilling techniques. But before we begin, let’s take a minute to talk about why all of this is so important. This program is intended for contractors and is not registered for continuing education credit. Take the course.

Posted:
December, 2011
Subject(s):
Concrete, Anchors, Jobsite Safety, Safety
Sponsor:
Bosch
 

Moisture Protection in Masonry Walls - Designing and Installing the Proper System to Minimize Moisture Infiltration

The building envelope is only as protected as its design, materials and construction. As a contractor or builder your use and proper installation of a moisture barrier system could be the difference between a structurally sound building and one that ages prematurely due to weatherization. This program will show you how moisture penetrates envelopes, and how to combat it through smart design, material selection and quality construction. This program is intended for contractors and builders and does not offer AIA credit. Take the course.

Posted:
November, 2011
Subject(s):
Masonry Construction, Walls and Ceilings, Moisture Barriers, Building Envelope
Sponsor:
Advanced Building Products
 

Rebar Tying Machines: Increasing Safety and Productivity

This programs is intended for contractors or job site foremen who use or require the use of rebar tying techniques for concrete construction. Rebar tying tools improve worker health, safety and welfare by eliminating repetitive wrist movement and awkward bending that can lead to injury and musculoskeletal disorders. Rebar tying tools also improve jobsite efficiency. This module will compare and contrast three different rebar tying tools and help you determine how a rebar tying tool can be used by your site crew to increase safety and efficiency. This program is intended for concrete construction professionals and does not offer education credit for AIA members. Take the course.

Posted:
November, 2011
Subject(s):
Concrete Construction
Sponsor:
MAX USA CORP
 

Green Waterproofing Solutions

1 LU HSW/SD

There are many challenges facing the building and design community in regards to the prevention of water, moisture, and gas leakages in structures. Undertaking proper green waterproofing measures at the outset of construction ensures the long-term viability and sustainability of buildings. Upon completing this course, you will have a better understanding of why waterproofing is necessary, including the effects of mold, deterioration of foundations, elimination of air quality problems, and efficient use of below-grade structures as living environments. You will be able to describe the steps necessary to create a leak-free foundation and you will be familiar with the products available to use when waterproofing a structure. Finally, you will be familiar with the green building process and green waterproofing solutions. This program is registered with the AIA for 1 HSW hour. Take the course.

Posted:
October, 2011
Subject(s):
Building Envelope, Moisture Barriers, Green Materials
Sponsor:
Mar-Flex
 

Colloidal Silica: New Technology for Better Concrete

Concrete is an increasingly popular choice for its aesthetic qualities in design, especially in flooring. Beautiful exposed concrete floors are common in restaurants, display rooms, high-end retail stores, museums, universities, and even homes. With its many aesthetic options for color, texture and levels of shine, concrete adds an appeal that's both timeless and modern. Because concrete is first and foremost a structural material, it requires specific chemical treatments and mechanical processing to overcome its inherent limitations as a finished surface material. This program will discuss the role of densifiers and colloidal silica technology in terms of strengthening concrete, performance and application requirements for project longevity. Take the course.

Posted:
September, 2011
Subject(s):
Admixtures, Hardeners and Densifiers, Concrete Construction
Sponsor:
Lythic Solutions
 

Concrete Basics: Curing and Sealing

1 LU LU

There are many factors that affect the long term durability of concrete. Some of these are: mix design, environmental conditions, structural loading and design, quality of the raw materials used in the concrete and mixing, placing and curing. This presentation will explain the basics of cement hydration, and introduce the various curing methods and floor treatments available. In addition, this presentation will help the specifying agency and/or end user identify the proper materials and products needed for the project. Take the course.

Posted:
September, 2011
Subject(s):
Concrete Surfaces, Concrete Curing
Sponsor:
W.R. Meadows
Certification(s):
AIA
 

Repair & Refurbish: High Performance Coatings for Concrete

1 LU

This program introduces different classes of high performance concrete coatings and compares and contrasts typical surface preparation requirements for different types of coatings. The course describes the basic chemistry and performance properties of different high performance coatings. Take the course.

Posted:
September, 2011
Sponsor:
Bayer Materials Science
Certification(s):
AIA
 

Concrete Waterproofing

1 LU

Few building materials offer the strength and versatility of concrete, which has been used for centuries. In some applications, however, waterproofing is absolutely critical for a functional, superior and long-lasting structure. This educational unit examines exactly how waterproofing works, and how it doesn’t, so the best waterproofing method can be specified for each project. Take the course.

Posted:
September, 2011
Subject(s):
Concrete
Sponsor:
Kryton International, LLC
 

Introduction to Synthetic Fibers

1 LU

To introduce the synthetic fiber concept and technology, this introductory program will use a simple fiber-characteristic formula – called the 4-C’s Fiber Formula – to distinguish the wide variety of fibers available, and offer background on how the differences can effect performance. The program will also highlight and explain the two basic synthetic fiber categories – first generation micro fibers, and 2nd generation macro fibers – and show a variety of real-world project applications where these fibers have been used successfully, along with the features and benefits allowed by that level of fiber. Take the course.

Posted:
September, 2011
Subject(s):
Concrete
Sponsor:
Forta
 

Below-Slab Vapor Protection: Taking the Ground out of Play

This program will discuss the often overlooked subject of below slab vapor protection. We will look at the problems associated with moisture vapor transmission. We will be examining the science behind these problems and the basics of moisture vapor drive. Then we will talk about the ASTM standards and ACI recommendations that are available to move your thinking beyond the minimums described in building codes. Take the course.

Posted:
August, 2011
Subject(s):
Concrete Subgrade, Concrete Flatwork, Slab, Moisture Barriers
Sponsor:
Stego Industries
 

An Overview of Insulated Concrete Forms

ICF’s can meet and exceed the challenges of today’s building requirements. With today’s design challenges and focus on building energy efficient structures, ICF technology can meet and exceed these requirements. Upon completion of the program you will be able to have a better understanding of what an insulated concrete form (ICF) is and what applications they can be used in. Take the course.

Posted:
July, 2011
Subject(s):
Insulated Concrete Forms, Building Envelope
Sponsor:
NUDURA
 

Indiana Limestone: Created by Nature, Crafted by Man

Indiana limestone quarries have been in operation since the mid 1800’s and geologists estimate that the supply of Indiana limestone is virtually unlimited. To better understand the value of the material and the ways it can best be used in projects, it is helpful to have a working knowledge of the quarry process and the physical properties of Indiana limestone. By the end of this learning unit, you will have a better understanding of how limestone gets from the quarry to the job site. You will know how to avoid mistakes on projects by understanding best practices for specification, detailing and construction. You will be able to list new usages and applications for limestone. And finally, you will be able to identify points of reference and how they can be helpful in all phases of their projects, no matter what the specified product. Take the course.

Posted:
July, 2011
Subject(s):
Masonry
Sponsor:
Indiana Limestone
 

Sustainable and Instant Cure UV Coatings for Concrete Floors

1.0 LU HSW/SD

In the last few years, a new surface treatment for concrete floors has been developed that is impacting selection preferences. UV-cured floor coatings provide a durable surface with an instant cure, yielding much faster return to service, while the near-zero VOC emissions and low odor make these 100% solids materials a safe and environmentally-friendly choice. Take the course.

Posted:
May, 2011
Subject(s):
Sustainability, Concrete Surfaces
Sponsor:
DSM
 

Cementitous Blends and the Impact of Sustainable Construction

1.0 LU HSW/SD

This program was originally presented at the January, 2011 World of Concrete show in Las Vegas. The presentation has been archived for the benefit of individuals who were unable to attend the show. By the end of this learning unit you should be able to: clarify the green building movement and a response to mitigating climate change caused by the building sector; identify sustainable construction solutions that are environmentally friendly while delivering performance; discern the cement industry's multifaceted approach to reducing CO2 emissions; and discern the cement industry's multifaceted approach to reducing CO2 emissions. Take the course.

Posted:
March, 2011
Subject(s):
Concrete Construction, Structure
Sponsor:
Lafarge
 

Insulated Composite Backup Panel Technology: Achieving Superior Thermal and Moisture Protection

1.0 LU HSW/SD

This course will outline the functional differences between an inner back-up wall and the rainscreen component. You will be able to identify key weaknesses and problems associated with popular multi-component back-up wall assemblies. Finally, you will learn one strategy for creating superior back-up wall assemblies in steel frame construction with single-component back-up wall systems. Take the course.

Posted:
March, 2011
Subject(s):
Building Science, Building Envelope, Energy Efficiency, Moisture Barriers, Rainscreen
Sponsor:
CENTRIA
 

Concrete Waterproofing with Crystalline Technology

1.0 LU HSW

Concrete is the primary material used to construct many above and below-grade structures. It is naturally porous and thus can absorb and weep water. For structures at or below grade where water infiltration may cause structural damage, concrete should be treated with waterproofing. This course will introduce you to concrete water proofing with crystalline technology. Take the course.

Posted:
December, 2010
Subject(s):
Concrete Construction
Sponsor:
Xypex
Certification(s):
AIA
 

Cement Based Flooring Systems: New and Rehabilitation

1 LU

By the end of this course you will be able to identify different types and components of floor resurfacers, list at least three applications of floor resurfacers, identify the advantages to resurfacing and be able to list the steps of the resurfacing process. Take the course.

Posted:
May, 2010
Subject(s):
Building Envelope, Flooring
Sponsor:
ProSpec
Certification(s):
AIA
 

Fly Ash: What it is, How it is Used and Why it Contributes to Green Building

1 LU HSW/SD

By the end of this course you will be able to describe what fly ash is, how it is produced, how it was developed and how it is used now. You will be able to list environmental benefits of using fly ash and how it can contribute to greener buildings. You also will be able to describe how fly ash is used in fiber cement products. Finally, you will be presented some information that will clear up commonly incorrect assumptions about fly ash and fiber cement. Take the course.

Posted:
September, 2009
Subject(s):
Building Envelope, Life-Cycle Assessment, Green Design
Sponsor:
Nichiha
Certification(s):
AIA
 

Selecting the Best Blindside Waterproofing System for Your Project

1.0 LU HSW

After viewing this course you should be able to determine which blindside waterproofing system is best for your project based on performance advantages and disadvantages of several systems discussed throughout the presentation. You will be able to list which tools to use in different situations; and discover tips to help you write effective waterproofing specifications. Take the course.

Posted:
December, 2010
Subject(s):
Building Technology, Concrete Construction
Sponsor:
Carlisle
Certification(s):
AIA
 

Soup to Nuts: Specification of Concrete Stone Veneer

1 LU

At the conclusion of this course, you will be able to define Concrete Stone Veneer and the installation process, list the three distinctive grout techniques, identify proper application techniques and identify key criteria for proper selection and specification. Take the course.

Posted:
January, 2010
Subject(s):
Concrete Construction, Masonry Construction, Building Envelope
Sponsor:
The Tapco Group
Certification(s):
AIA
 

Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement
 
Advertisement