KWIK HUS and KWIK HUS-EZ Screw Anchors feature an optimized thread design, superior load values, and approvals.
At-XP Acrylic-Tie is a fast-curing anchoring adhesive for uncracked concrete that’s specifically formulated for optimum performance in all types of weather conditions, including below-freezing temperatures.
ChubbySmack Concrete Anchors are nuts with the engineered bearing area built into the design.
The Thermal Pos-I-Tie features a plastic wing nut, stainless-steel barrel, neoprene washer, and screw inserts for steel stud, concrete, CMU, brick, and wood backup walls.
The HIT-HY 150 MAX-SD fast-curing adhesive anchor system is ideal for installing 3/8- to 1-in.-diameter threaded rods and #3 to #8 rebar.
The company now offers a full line of lengths and diameters for Trubolt +.
The Reinforcing Anchor System is fashioned out of a steel bar enclosed in a mesh fabric sleeve and inserted into the structure where reinforcement is needed.
-
The Torq-Cut self-undercutting anchor is a heavy-duty, high-capacity anchor designed and tested for use in cracked and uncracked concrete under static and seismic loading conditions.
The KB-TZ expansion anchor is available in Type 316 stainless steel, the first SS316 stud anchor on the market to receive ICC-ES approval.
The Reinforcing Anchor System is used for repair and renovation of existing masonry buildings.
-
The Titen HD rod hanger is a high-strength screw anchor that provides a fast and convenient way to suspend threaded rod.
This system uses the company's Drill Bolts to anchor brick veneer walls to steel-stud backups.
The Thermal Pos-I-Tie is a two-piece brick veneer anchoring system consisting of a stainless steel barrel, plastic wing nut, neoprene washer, and two choices of screws for either steel studs or concrete/CMU backups.
With a fully knurled nail tip spanning 22 mm (3/4 in.) on all fastening lengths, the X-U Fastener achieves a reliable hold at reduced penetration depths.
The HIT-HY 10 adhesive anchor system is a versatile, fast-curing solution for non-specified fastening points.
-
With an improved wedge design and higher strength base material, the Kwik Bolt 3 stud anchor allows shallow embedment depths to reduce drilling time.
-
The Heli-Pin facade anchor stabilizes brick and masonry walls and makes less visible repairs to masonry building facades.
-
Made from stainless steel, the Keil mechanical anchor comes in eight different lengths from 4 mm to 15 mm.
-
The Reward TieKey is an easy-to-install, cast-in-place, adjustable ICF masonry tie anchor embedded into an ICF-formed concrete wall.
Post-installed mechanical anchors come in several styles: wedge, sleeve, drop-in, stud, and undercut. The undercut anchor can sometimes require additional drilling, and often can be three times the cost of other post-installed mechanical anchors. So why would you choose to use one?