Project Details

Project Location: San Diego
Contractor: T.B. Penick & Sons, San Diego (Facebook)
Architect/designer: Ricardo Legorreta / Stantec
General contractor: Turner Construction Co.
Subcontractor: Mark Beamish Waterproofing Inc.
Amount of polished concrete: 48,300 square feet
Size of building/project: 65,000 square feet

The Cross Border Xpress, located roughly between the San Ysidro and Otay Mesa ports of entry, is a one of a kind pedestrian bridge that allows travelers to walk across the U.S. – Mexico border directly into the main terminal of the Tijuana International airport. This allows travelers to park on the U.S. side and bypass the traditional border entries which usually takes two to four hours to cross.

T.B. Penick collaborated with the owner, architect, and general contractor to polish the 48,300 square feet of integrally colored concrete to a cream/sand finish and to also perform architectural sawcuts throughout the project in order to epoxy set 3,300 lineal feet of 1/8-inch zinc terrazzo strips.

One challenge was achieving a consistent finish since the first floor was poured slab-on-grade and the second floor was poured on a pan deck. Another challenge was addressing all of the shrinkage cracks. To do this, T.B. Penick utilized a colored epoxy system to fill in the cracks. This was challenging due to the variations in color which required custom colors to be made onsite to allow the repaired cracks to blend in with the finished surface.

Finally, the project required coordinating with U.S. Customs and Border Protection due to the high security aspect of the location on one of the most heavily fortified spots on the border. It also required collaboration with the contractor working on Mexico’s side of the facility in order to help them achieve the required finish.