ConcreteSurfaces

Troubleshooting

Posted on
Surface preparation: Obtaining the right profile

If you don't do a sufficient job of preparing the substrate, all of your... More

Posted on
Site Conditions and Installing Decorative Overlays

Manufacturer specifications for decorative overlays will describe when to install... More

Posted on
How to Collect and Use Jobsite Data

Take advantage of available technology to track your polished concrete work so you... More

Posted on
Creating Flat Floors for Concrete Polishing

Flatter floors will improve the overall look of a polished concrete surface. More

Posted on
Problem Clinic: Why Does Concrete Discolor?

Why does concrete discolor even though the specifications (wet cure) were followed... More

Posted on
Birdbaths

I am bidding on treating a concrete slab and one of the specified requirements is... More

Posted on
Re-entrant Corner Problems

We recently were called to apply an epoxy surface to a newly constructed 6-inch-thick warehouse slab with a tight 12x12-foot sawcut control joint pattern. Can you explain what may have caused these random cracks to develop? More

Posted on
Surface Preparation Is Critical for Bond

As a floor covering installer, I often find a waxy substance on the concrete slab... More

Posted on
Moisture Problems with Concrete Slabs

Why does it seem that moisture-related flooring problems are more common today than in the past? More

Posted on
Solutions

Here's how some problems in the field got solved. More

Close X