Optional rear shroud
An integral aluminum rear shroud with heavy-duty, see-through Lexan windows is available. Large service access doors on both sides of the shroud enable easy greasing, maintenance and service.
JetRodder water pump
The water pump is located at the side of the unit below the top of the chassis frame, allowing 100 percent of the water to gravity feed the pump to optimize water pump efficiency and eliminate the potential for water pump damage due to cavitation. Designed specifically to clean sewers, the water pump uses a slow pump stroke to deliver maximum, continuous flow and pressure with minimal wear. This jackhammer action provides optimal cleaning capability, and since the pump is hydraulic and uses a single piston, no components or belts are required.
Hose reels
The standard front-hose reel has a capacity of 800 feet of 1-inch hose, and telescope up to 15 inches forward and rotate up to 270 degrees, providing easy alignment with manholes. The standard rear-hose reel has a capacity of 700 feet of 1-inch hose, and can rotate a total of 180 degrees – 90 degrees to curb side and 90 degrees to street side.
Park-N-Clean Technology
Featuring the Park-N-Clean technology system allows the operator to park near the manhole and, with minimal setup time, start cleaning within minutes. Simple controls located at the hose reel or on the optional remote allow the operator to manage all machine functions. The Vactor water system with multi-flow allows the operator to set a lower desired flow at a lower rpm without diverting high pressure water back to the water tank.
In addition, Vactor offers a full line of RamJet trailer and skid-mounted jetters specially designed for cleaning municipal sewer, drain and pipe lines and culverts.
